When the alarm system ensures the safety of the vehicle, you might find it disturbing sometimes. There might be different types of reasons behind this which we’ll be discussing later. No matter what the reason is, I know that you’re here because you want to get the alarm disabled.
Here you’ll know how to stop the alarm on Dodge Ram. I’ve described the process clearly so that you don’t have any confusion. Still, if there is any confusion in your mind, you can opt for the help of YouTube videos later.
Before jumping into the process, let’s talk about the reasons the alarm system is there and the problems that make people want to disable such a security system.
What does the Alarm System Do?
The alarm system of your vehicle is there to ensure added safety. Sometimes when you’re not around the car, people can try to open it for stealing your things or the car.
In that case, the alarm saves your car vehicle by horning and letting people around know that the person trying to open it is not the owner. Thus, the alarm system saves your vehicle from theft. So, the matter is- why do people choose to disable such a secured system that saves the vehicle?
Reasons behind Disabling the Alarm
The primary reason behind disabling the alarm system is unnecessary horning. If there is any problem in the program of the alarm system, it starts horning in the middle of the road. Sometimes, it starts horning even without any problem with the alarm system.
Also, most alarm systems don’t come with a way to distinguish between the owner and an intruder. So, you might find your car horning when you’re trying to get inside. This is an uncomfortable situation that might result in a bad situation.
That’s why, to get rid of the hassles of alarm, people tend to disable it, especially where the chance of theft is very low. Maybe you’re trying to do this for something similar. Let’s not waste more time and learn the trick to disable the alarm on your Ram.
Related Post: How Long Do Rechargeable Batteries Last?
How to Disable Alarm on Dodge Ram?
The simplest way to disable the separate alarm system is by disconnecting and removing it from the vehicle. This is an easy process that anyone can do who have slight experience with working with vehicle electric system. Below is the process for a separate alarm system.
Step 1- Opening the Dashboard
To get access to the alarm system, you need to open the dashboard first. It is situated in front of the driving seat, at the rear of the steering wheel. If you find any screw, use a screwdriver to open the dashboard.
Check the manual if you don’t find any screw. There you’ll find the way to access the dashboard.
Step 2- Identifying the Alarm Line
Inside the dashboard, you’ll see many wires that are connected to different components of the dashboard. You have to detect the alarm line among those. In most cases, it is a cable with a two-way connecting port- one is connected to the battery, and another is connected to the alarm.
If you can’t identify the alarm line, take the help of the manual again. Check the manual thoroughly. There you’ll find how the alarm line looks line. Identify and separate it.
Step 3- Unplugging the Alarm Line
Once you find the line, you have to disconnect it. At first, disconnect the edge that is connected to the engine ignition switch. Then disconnect the part that is attached to the alarm system.
Doing this wrong might cause a minor accident. So, don’t go for disconnecting the alarm side first. Also, be careful while doing this.
Step 4- Connecting the Ignition System
When you disconnect the alarm line from the ignition system, it gets detached from the main electrical system of the vehicle. So, after disconnecting the alarm line, you need to connect the ignition system to the electrical function. Do this.
Don’t miss this step because if you don’t do it, your dashboard won’t work properly and show no reading of wrong reading. This is a true hassle.
Step 5- Closing the Dashboard
At the last step, take out the alarm and extra wire (if there is any). Then close the dashboard and fix it with the help of a screw or any other way it was attached before. Now the alarm is in your hand. Your vehicle is not going to make any more unnecessary noises.
This five-step method is a simple method of disabling the alarm of your Dodge Ram if it is a separate system.
How to Disable Built-in Alarm System
If the alarm is a built-in alarm, the process is a bit changed. Step 1 and step 2 would be similar in this case. At first, you need to access the dashboard and then identify the alarm line.
Then, in step 3, you need to cut the alarm wires. You’ll find two wires coming out of the alarm system of the vehicle. You need to cut both the lines with the support of pliers or similar other tools. Then, use a tape to splice the wires together. After that, leave it there.
In this case, there is nothing to do with the ignition system. So, close the dashboard once you’re done.
Following this way, you can disable the built-in alarm system of your Dodge Ram.
Related Post: How To Open Toyota Camry Trunk Without Key [ 7 Easy Methods ]
Way to Reinstall the Alarm
After disabling the alarm, if you think that it is a bad idea, you can start using it again. This time, you need to do the same thing, but in reverse.
Start by opening the dashboard with the help of a screwdriver or any appropriate way. Then disconnect the ignition system from the electric system of the vehicle. This would give you an opening in the line to insert the alarm line.
At first, connect the alarm line you disconnected previously with the alarm. Then, take the other part and connect it to the ignition switch. Make sure that both sides are connected properly without any weak points.
Finally, put the alarm inside and close the dashboard. Lock it properly with the screws or the appropriate locking system.
This way, you can enable the alarm system again anytime you want. You might wish to use the system again anytime. So, after disabling and dismounting the alarm, keep it in a safe place.
Things to Remember When Disabling the Alarm
Disabling the alarm of your car is an easy task. But you should put a few issues in mind. Let’s talk about those.
- Inside the dashboard, there are a lot of important wires that work for the proper functioning of the vehicle. So, you must recognize the alarm wire properly. If you disconnect the wrong wire, this will end up being a mess. Be careful while picking the wire. Don’t disconnect anything without being 100% sure.
- If you don’t know about working with the wires, consider going to a mechanic. Working with an electric system is dangerous. Still, if you want to do this, search for video tutorials and watch those properly before starting.
- If you create a mess by any chance, go to a mechanic as fast as possible. The electrical system of your car is complex. So, the risk of creating a mess is very high.
- When you disable the alarm system, you won’t be enjoying the safety feature it offers. So, you always need to park the vehicle somewhere safe. Also, you shouldn’t go far from it. The garage should be a safe place too.
- You don’t know when you want to enable the alarm system again. According to my experience, most people look for enabling the alarm system after disabling it. The risk of safety is the primary reason behind it. So, you should keep the alarm and the wire somewhere safe. You’ll need it again.
Related Post: How Long Does It Take to Rebuild a Transmission?
FAQs About Disable Alarm on Dodge Ram
Can we completely depend on the alarm for the safety of my vehicle?
The alarm system is a great way to let others know that the person who is touching or trying to open the car is not the owner. So, when the alarm rings, the thief leaves your car immediately. Thus, the alarm saves your car.
If you park your car somewhere in an empty place, the alarm won’t scare the thief because there is none to listen to it. In that case, it is not safe.
Can you suggest an alternative to the alarm system?
Typically, the alternative to the traditional alarm system is another alarm system. You’ll find different types of alarm systems that offer better security compared to the traditional ones. Going for those is considered a good choice. Evaluate the benefits of the options and pick the best one you think.
Try to pick something that alerts you through the mobile phone when someone tries to access the car forcefully.
Is replacing the car alarm harmful for my Dodge Ram?
Replacing the car alarm won’t be a bad choice. If you think that the existing alarm system is troubling you, uninstall it and pick something else for the safety of your vehicle.
Doing this properly won’t be harmful to your car. But if you make any mistake in the replacing process, the new alarm might not work properly. Going to an experienced mechanic would save you from potential hassle in this case.
How to Disable Dodge Truck Seat Belt Alarm
References:
- https://itstillruns.com/disconnect-ram-alarm-system-amp-7908813.html
- https://www.vehiclehistory.com/articles/dodge-ram-1500-resetting-the-anti-theft
- https://www.dodgetalk.com/threads/how-to-disable-factory-alarm.493537/
- https://www.fixya.com/cars/t25979328-disable_1998_dodge_ram_security_system
Leave a Reply